Technical FAQs

My internet has stopped working completely, what should I do?

There are several things to try if you go offline. Please run through this list before giving us a call:

Turn it off and on again
While this sounds like a stock IT response, you’d be amazed at how often this works. The first thing to do is to check that all the cables are plugged in. If that doesn’t resolve the issue, turn the modem off and on again. To do this with an SB2 modem:

  1. Remove power leads from both the Viasat Tooway modem and the 3rd party Wi-Fi router.
  2. Put power to Viasat Tooway modem back in and wait approx. 5mins for reboot to complete.
  3. Now put power for 3rd part router back in and allow 5mins for restart to complete and test if Wi-Fi now working again.

To do this with an SB2+ modem is even easier, simply remove the power lead and put the power back in.

Moving your modem within your house can also cause issues so if you have moved it, try moving it back to where it was.

Discharge the static from the modem
Over time, static energy can build up in the modem. This can stop it working, but is easily fixed by following these steps:

  1. Unplug the modem from the power source
  2. Unplug the Ethernet cable from the modem
  3. Unplug the coaxial cable from the modem
  4. Now plug the modem back to the power source for 10 seconds
  5. Unplug the modem from the power source again
  6. Reattach the coaxial cable to the modem
  7. Reattach the Ethernet cable to the modem
  8. Plug the modem back into the power source

Unplugging all the cables and putting the power cable back in releases energy from the sockets and often will get the modem working again.

Replace the router ethernet cable
If you are using an SB2 modem, rather than an SB2+, it will have an external router connected by an ethernet cable. This can be the cause of some issues, so if you have another cable, try using that to see if that is the cause of the issue.

Check the dish alignment
Extreme weather can cause your dish to move out of alignment or you may be moving it purposefully if you use satellite internet with a mobile home or if you have moved house and taken the system with you. Follow the steps below to ensure your dish is correctly aligned.

  1. Go to:
  2. Enter postcode or area, note beam colour result.
  3. When connected to Tooway modem via Wi-Fi/Ethernet, open web browser.
  4. Enter, select beam colour and click next (or black arrow)
  5. Click finish to lock on to beam, hopefully with 10dB+ SNR signal.
  6. This will take you to modem status page to show if online.
  7. This will activate the dish pointing process where the transceiver on the dish will to start making a *beeping* Sound and you will physically need to adjust the dish by elevation and direction.
  8. When you are close to locking on to the signal the Beeps will become quicker until will make the dish to start making a continuous (Solid Tone).
  9. The Current Rx SNR readings on the modem needs to be at least 10dB or higher this will indicate that the dish is in full alignment.
  10. When the SNR signal is 10dB or above click Finish.

See our user guides for SB2 and SB2+ alignments.

You can also see the orbital position of the satellite here:

If these actions don’t solve the issue, give us a call on 01869 222 900.

My internet is slow, what should I do?

First, we recommend you try changing your Wi-Fi channel. We find that a huge amount of buffering issues can be resolved by changing the Wi-Fi channel. The Wi-Fi channel is set to auto by default. This means that when you connect the modem, it will find the first working channel and keep this, even if a different channel may provide a faster service.  In our experience, channel 11 provides the fastest service. You can see how to change the channel here.

If that doesn’t help, you’ll want to get an accurate picture of how slow your internet is. You need to use a dedicated speed test tool as many websites can’t accommodate the latency inherent with Satellite internet.

To run the speed test visit . Run the test and note the results. Be sure to note the Jitter reading. You’ll need these results when talking to our technical specialist. Then, give us a call.

I’m running out of data and don’t know why.

Keeping track of your data manually is harder than you think. But there are apps that can help you.

For Windows and Android devices the data monitoring application we recommend is Glasswire. This is a free tool

For Apple devices the data monitoring application to download is Little Snitch. Theres a cost associated with this, but the free trial for 30 days which should be enough to give you a handle on where your data is being used.

How do I connect the SB2 standard modem to my own router?

Simply run a lan cable from ethernet port on modem to Wan port (where possible) on wireless router.

If you are a business user with a fixed IP the process is a little more involved. Please contact our technical department to set this up for you.

I’ve forgotten my Wi-Fi password.

Not to worry, you can reset your modem to factory settings – this will allow you to use the password shown on the sticker on the modem to get back online. To reset the SB2+ modem press a sharp item such as pin or needle into the reset hole at the back for around 15 seconds.

Where can I see the information about my router?

Type in into your browser. This will take you to information about your router and provide information about all your equipment. To log into the modem to make changes go to: and log in with your user name admin and password admin.

I’ve upgraded from SB2 to SB2+; which cable should I use?

If you have recently upgraded, you’ll see that your new router only has one IFL connection, not two like you are used to. With the new SB2+ modem you want to use just the Transmit / Out cable from the old modem. The other cable is no longer required.

How do I run a debug report?

Once you’ve spoken to us, we may recommend running a debug report for Tooway analysis. We’ll talk you through this on the phone, but for reference, here are the steps:

  1. Connect to the modem, ideally via Ethernet cable, then open your web browser.
  2. Enter into your web browser address bar.
  3. Click on the “Increase debug level” button, then wait a few seconds.
  4. Click “Generate debug report” button. The report is then sent to Tooway in the background.

I use a VOIP system and I’m having issues, can you help?

We used to offer these services, but no longer do. Blueface took over our VOIP customers and can be found at: